A) To install screws in the system unit B) To clean dust from components C) To organize cables inside the case D) To identify and troubleshoot system problems
A) To avoid testing the computer B) To replace several components at once C) To pinpoint the problem and avoid unnecessary replacement D) To make the repair take longer
A) Replace the motherboard immediately. B) Replace the power supply without testing. C) Check whether the RAM is installed correctly. D) Remove the operating system.
A) The RAM has too much storage capacity. B) Heat transfer from the CPU is reduced. C) The network card is disconnected. D) The operating system needs reinstalling.
A) Diagnose the problem, confirm the affected component, then perform the appropriate repair safely. B) Ignore the symptoms if the computer still turns on. C) Reinstall all software before checking the hardware. D) Replace several components until the computer works.
A) Technician D uses ESD protection and handles the components carefully. B) Technician B works quickly and ignores static electricity. C) Technician A handles components while standing on an ungrounded surface without ESD protection. D) Technician C places components anywhere on the worktable.
A) Observe safety ? replace the fan immediately ? retest ? inspect thermal paste only if shutdown continues B) Observe safety ? inspect the fan, heat sink, and thermal paste ? correct the identified cooling fault ? retest C) Observe safety ? inspect the fan, heat sink, and thermal paste ? correct the identified cooling fault ? retest D) Observe safety ? reapply thermal paste immediately ? retest ? inspect the fan only if shutdown continues
A) They help keep cables neatly organized. B) They test electrical circuits. C) They prevent all hardware failures. D) They remove software errors.
A) Leave the computer running so the fans keep moving air. B) Remove components first and check safety precautions afterward. C) Shut down the computer and prepare a safe work area before handling internal parts. D) Spray cleaning liquid directly on the motherboard before opening the case.
A) Replace the fan immediately without checking its condition. B) Ignore the dust because the fan is still spinning. C) Clean the dust carefully with suitable cleaning tools, then verify the fan operates properly. D) Install additional software before cleaning the hardware.
A) Check the computer for errors and proper operation. B) Check the computer for errors and proper operation. C) Disconnect all storage devices permanently. D) Remove all installed applications.
A) Components handled without ESD protection B) Hardware cleaned C) System tested D) Software updated
A) Update software but ignore hardware condition. B) Clean the case only when it becomes visibly dirty. C) Clean the hardware, update software, check for errors, and observe safety precautions. D) Replace components regularly even when no problem is found.
A) Prepare a safe workspace ? clean hardware ? update software ? skip error checking ? verify operation B) Prepare a safe workspace ? update software ? replace working hardware ? check errors ? verify operation C) Prepare a safe workspace ? inspect/clean hardware ? update needed software ? check errors ? verify operation D) Prepare a safe workspace ? check errors ? clean only the case exterior ? update software ? verify operation
A) To help keep software current and functioning properly B) To increase the physical size of the computer C) To prevent the computer from using storage devices D) To replace the need for hardware cleaning
A) To verify whether the system is functioning properly and identify remaining problems B) To avoid testing the completed work C) To make the computer consume more power D) To increase the number of installed components
A) Ignore the dust and update only one application. B) Remove all applications and leave the hardware untouched. C) Clean the hardware safely, update the software, and check the system for errors. D) Clean the hardware safely, update the software, and check the system for errors.
A) The remaining error still needs to be identified and diagnosed. B) The system is fully repaired because the hardware is clean. C) The error can be ignored because maintenance is complete. D) All hardware should be replaced immediately.
A) Poor practice only if the computer also has outdated software. B) Poor practice, because routine cleaning should address buildup before it contributes to problems. C) Appropriate, because maintenance is needed only after failure. D) Appropriate, because dust does not affect system performance.
A) Date ? observed condition ? maintenance task ? computer brand ? room location B) Date ? hardware list ? software names ? purchase date ? user name C) Date ? observed condition ? maintenance task ? safety measure ? result/follow-up D) Date ? technician name ? computer model ? keyboard type ? monitor size.
A) 2 GB B) 1 GB C) 4 GB D) 8 GB
A) 8 GB B) 4 GB C) 1 GB D) 2 GB
A) 64 GB B) 16 GB C) 32 GB D) 20 GB
A) 64 GB B) 32 GB C) 16 GB D) 20 GB
A) 3 GHz processor B) 500 MHz processor C) 2 GHz dual-core processor D) 1 GHz or faster processor or SoC
A) DirectX 7 with WDDM 2.0 B) DirectX 10 only C) OpenGL 4.0 only D) DirectX 9 or later with WDDM 1.0 driver
A) Audio CD only B) Network cable C) Installation media such as a bootable flash drive or optical media D) Printer cable
A) F5 or F6 B) ESC or F12 C) F1 or F3 D) DEL or F2
A) F10 B) F8 C) F2 D) F12
A) Modern B) Secure C) Legacy D) UEFI
A) Back B) Next C) Cancel D) Finish
A) Repair B) Install now C) Restart D) Update
A) Skip license B) Use trial mode C) Activate later D) I don't have a product key
A) The keyboard layout B) The edition activated by the product key C) The monitor resolution D) The computer brand
A) Offline installation B) Custom license C) I accept the license terms D) I decline the license terms
A) Upgrade: Install Windows B) Repair your computer C) Express Install D) Custom: Install Windows only (Advanced)
A) Optical Drive B) Recovery Drive C) System Reserved only D) Drive 0 Unallocated Space
A) Keyboard layout B) Product key C) Hard drive partition D) Boot mode
A) Remove B) Back C) Skip D) Cancel
A) Set up for organization B) Set up for testing C) Set up for personal use D) Set up for repair
A) Router account B) Printer account C) BIOS password only D) Microsoft account information
A) Timeline B) Cortana C) Task View D) OneDrive
A) The printer brand B) The desktop wallpaper C) The screen brightness D) The target system's hardware requirements
A) Applications never use operating systems B) Programs are generally operating-system dependent C) It removes the need for updates D) It changes the monitor resolution
A) Speaker volume B) Keyboard color C) Software requirements and required updates or utilities D) Mouse size
A) Disconnect the keyboard B) Reboot the machine before launching the software C) Immediately uninstall it D) Delete the operating system
A) Screen saver B) User wallpaper C) Desktop theme D) Minimum system requirements
A) Compatibility with the operating system version B) Monitor brand C) Keyboard layout only D) Printer ink level
A) Whether customers can successfully install and set up the software B) Whether the keyboard is wireless C) Whether the desktop wallpaper loads D) Whether the monitor has speakers
A) Color test B) Stress test C) Keyboard test D) Login test
A) The monitor's brightness setting B) The computer's boot animation C) The hardware specification, brand name, and device code D) The user's wallpaper and desktop theme
A) The required scanner driver may not be installed B) The computer must perform a warm boot C) The computer needs a new BIOS password D) The hard drive must be converted to GPT
A) A boot menu shortcut B) A BIOS setup password C) A monitor calibration tool D) An All-in-One DriverPack application
A) Selecting the wrong disk changes the CPU speed B) The wrong disk will increase RAM capacity C) Selecting the wrong disk can result in permanent deletion of data D) The wrong disk will automatically install Windows
A) Partitions or volume formatting on the selected disk may be removed, causing data loss B) The monitor will stop displaying colors C) The BIOS will automatically update D) The keyboard will become wireless
A) `new partition system` B) `make partition active` C) `create partition primary` D) `create disk bootable`
A) `start` B) `boot` C) `active` D) `enable disk`
A) FAT32 replaces the BIOS chip B) FAT32 increases the computer's RAM C) FAT32 is specified in the procedure for UEFI-supported platforms D) FAT32 automatically installs device drivers
A) Change the BIOS password B) Delete the USB partition C) Copy the operating system files to the prepared USB flash drive D) Remove the active status
A) Install a printer driver B) Change the monitor's fan settings C) Check and configure the BIOS/UEFI boot order so the USB device can be selected as the boot device D) Replace the keyboard |