ThatQuiz
|
Test Library
|
Take this test now
Remaster - Quiz
Remaster
  • 1. What is the primary goal of increasing volume and compressing dynamic range in the 'loudness war'?
A) To remove background noise
B) To make the recording sound louder at regular volume
C) To increase the clarity of the audio
D) To improve the signal-to-noise ratio
  • 2. What is a potential negative side effect of using noise reduction during remastering?
A) It increases the dynamic range
B) It can leave audible artifacts and affect the signal
C) It makes the music sound clearer
D) It automatically adjusts the EQ to user preferences
  • 3. According to Steve Hoffman, what is an advantage of using flat EQ in mastering?
A) It prevents the loudness war
B) It allows listeners to adjust EQ to their own preference
C) It makes the recording sound perfect on all equipment
D) It enhances the original artist's intended sound
  • 4. Why is the lack of original artist involvement in remastering a concern?
A) The record may not sound how the artist originally intended
B) It prevents the use of noise reduction software
C) It makes the file size larger
D) It increases the cost of the production
  • 5. What is the minimum horizontal resolution required to digitally scan a film for DVD or Blu-ray?
A) 8,192 pixels
B) 4,096 pixels
C) 2,048 pixels
D) 1,024 pixels
  • 6. Approximately how much data is generated by scanning a full frame film at 4K resolution before editing?
A) At least 50 gigabytes
B) At least 100 terabytes
C) At least 2 terabytes
D) At least 12 terabytes
  • 7. Which software is mentioned for removing scratches and dust from damaged film?
A) Digital Restoration System (DRS)
B) Pro Tools
C) iConform
D) Technicolor
  • 8. What software is commonly used to remaster audio by removing noise and boosting dialogue?
A) DRS
B) Pro Tools
C) Photoshop
D) iConform
  • 9. What was the result of the three-strip Technicolor process in the 1930s?
A) A single digital file in 4K resolution
B) Surround sound audio tracks
C) A high-definition videotape master
D) Three black and white negatives using color light filters
  • 10. How did software fix the shrinkage issues of the cyan, magenta, and yellow records in The Wizard of Oz?
A) It re-scanned them at 8K resolution
B) It compressed the audio range
C) It morphed them into correct alignment
D) It discarded the damaged portions
  • 11. What detail became visible on the Scarecrow's face after The Wizard of Oz was restored?
A) Burlap on his cheeks
B) The actor's real hair
C) A rivet between his eyes
D) A scar on his forehead
  • 12. What physical detail became visible on the Tin Man after the restoration of The Wizard of Oz?
A) The paint texture on his costume
B) A rivet between his eyes
C) A crack in his metal plating
D) The seam of his mask
  • 13. Why were shows made between the 1980s and 2000s difficult to remaster in HD?
A) They did not have audio tracks
B) The original film negatives were destroyed
C) They were shot on low-resolution digital cameras
D) They were edited on standard-definition videotape
  • 14. What tool allowed shows like The X-Files to be remastered in HD?
A) The iConform system
B) Proprietary color filters
C) The loudness war compressor
D) The three-strip process
  • 15. How much did it cost Paramount to remaster Star Trek: The Next Generation?
A) Over $1 million
B) Over $100,000
C) Over $12 million
D) Over $50 million
  • 16. What is the first step in the remastering process mentioned in the text?
A) Adjusting the volume
B) Locating the original analog version
C) Digitizing the tracks
D) Choosing the track order
  • 17. What decibel level designates the loudest recordable sound in recording studios?
A) Negative ten
B) Negative infinity
C) Zero
D) One hundred
  • 18. What happens if a track's loudness exceeds the cap set by a limiter?
A) The peak is automatically lowered
B) The track becomes sonically unbalanced
C) The listener gains control over the volume
D) The analog original is discarded
  • 19. Which units of measurement are used to measure loudness in recording studios?
A) Positive decibels
B) Bits per second
C) Percentage of dynamic range
D) Negative decibels
  • 20. Does remastering always require equalization or compression?
A) No
B) Only for film
C) Only for vinyl
D) Yes
  • 21. What is considered an ideal source for a high-resolution release?
A) A low bit rate copy
B) A worn-out pressing master
C) An analog tape several generations removed
D) The best source possible
  • 22. What caused companies to realize that back-catalog items could generate revenue?
A) A decline in new music production
B) Government regulations on media
C) The invention of streaming services
D) The success of the first CD remasters
  • 23. What were interim recordings for vinyl records often called?
A) Father tapes
B) Generation tapes
C) Mother tapes
D) Child tapes
  • 24. What is a major downside of analog tape copying?
A) Higher electricity consumption
B) Generational loss
C) Incompatibility with digital formats
D) Increased file size
  • 25. What did the advent of digital recording in the late 1970s allow for?
A) Increased tape hiss
B) The removal of all sound effects
C) The invention of vinyl
D) Duplication without generational loss
  • 26. Which of these is a common format for a master recording?
A) Blu-rays
B) Streaming data
C) Social media posts
D) Cloud storage
  • 27. What effect did Digital Noise Reduction have on the remaster of Predator?
A) Schwarzenegger's skin looked waxy
B) The picture became too grainy
C) The aspect ratio was distorted
D) The color saturation was lost
  • 28. What change did Steven Spielberg make to the 2002 version of E.T. the Extra-Terrestrial?
A) Replaced guns with walkie-talkies
B) Changed the color of the police uniforms
C) Added new computer-generated characters
D) Removed the alien entirely
  • 29. What did the DVNR process often mistake for damage on animated cels?
A) The character's eyes
B) Foreground shadows
C) Background trees
D) Stray ink lines or smudges
  • 30. What allows Toon Boom Harmony to re-render work at different resolutions easily?
A) Lossless vector shapes
B) Cloud-based rendering
C) Bitmap overlays
D) Artificial intelligence
  • 31. What software was used to construct the digital images in South Park?
A) Adobe Flash
B) Blender
C) Toon Boom Harmony
D) Maya
  • 32. Which tool was used by Discotek to upscale the anime Digimon?
A) FilmOut Pro
B) Maya
C) Toon Boom
D) AstroRes
  • 33. What is the primary difference between a video game remaster and a remake?
A) Remakes involve recreated models
B) Remasters are only for films
C) Remakes are only for PC games
D) Remasters do not update ambience
  • 34. Which of these is a factor contributing to a video game showing its age?
A) Lower resolutions
B) Increased complexity
C) Better marketing
D) Higher frame rates
  • 35. What is an example of a game collection that had graphics re-rendered at higher resolutions?
A) Doom 1993
B) Super Mario World
C) Hitman HD Trilogy
D) Halo: Combat Evolved Anniversary
  • 36. On the Xbox 360, what was the resolution of the Hitman HD Trilogy?
A) 480p
B) 4k
C) 1080p
D) 720p
  • 37. What is the original resolution of Hitman games on the Xbox?
A) 720p
B) 480p
C) 240p
D) 1080p
  • 38. What analogy is used for the debate on remastering graphics?
A) Colorizing black-and-white films
B) Re-releasing movies in 3D
C) Translating books into new languages
D) Remastering vinyl records
  • 39. Why were 3D models in early games simple, such as mittens instead of fingers?
A) To make games more abstract
B) To save battery life
C) Lack of developer creativity
D) Limited 3D rendering speed
  • 40. Which game is used as an example of having its graphics redesigned?
A) Halo: Combat Evolved Anniversary
B) Hitman: Contracts
C) Doom
D) Hitman 2: Silent Assassin
Created with That Quiz — the site for test creation and grading in math and other subjects.