A) Right Button B) Center Button C) Top Button D) Left Button
A) Numbers 1, 2, 3, and 4 B) Numerals I, II, III, and IV C) USB and PC Ports D) Letters A, B, C, and D
A) Numbers 1, 2, 3, and 4 B) Letters A, B, C, and D C) Numerals I, II, III, and IV D) USB and PC Ports
A) Press the Back button until a Shut Down dialog box appears, then selecting the check with the Center button B) Remove the rechargable Li-Ion battery pack C) Insert the Shut Down USB adapter into the USB port on the side of the EV3 D) Press and hold the Left and Right buttons for 5 seconds
A) Use the direction buttons to navigate, Center button to select, and Back button to cancel or go back. B) Use the LEGO IR remote C) Use the Sound sensor and the built-in voice commands D) Touch the screen with an included stylus pen
A) File Navigation (second tab) > Select the Project > Select the Program B) Settings (fourth tab) > Brick Info > Recently Run, then use the center button to select C) Run Recent (first tab) > Select the program then press the center button D) Brick Apps (third tab) > Port View > Select the motor or sensor that you just recently used to run that program
A) Run Recent (first tab) > Select the program then press the center button B) File Navigation (second tab) > Select the Project > Select the Program C) Brick Apps (third tab) > Port View > Select the project that is linked to available sensors and motors D) Settings (fourth tab) > Brick Info > Projects, then use the center button to select the programs
A) Adding a block to display the motor/sensor value when running a program B) Attaching a second screen adapter to the USB Port on the side of the EV3 C) Using the Brick Apps (third menu) > Port View > Select the motor or sensor you want to view
A) On the EV3 Software B) On the back of the EV3 C) In the Settings (fourth tab) menu D) Behind the battery pack
A) In the EV3's firmware menus B) In the printed manual that came with the EV3 Set C) In the Robot Educator section of the EV3 Education Programming Software
A) Ethernet cable B) Power cable C) USB cable
A) Process data and make decisions B) Provide power to onboard electronics C) Create a physical effect like turning a wheel
A) Canvas, palette and communication pane B) Recent programs and settings C) User guide and Robot educator
A) Advanced blocks B) Action blocks C) My blocks D) Flow blocks
A) Advanced blocks B) My blocks C) Flow blocks D) Action blocks
A) all of the listed attributes B) they can be on, off, on for seconds, on for rotations, on for degrees C) end with a coast or brake D) positive power rotates motor clockwise/negative power rotates motor counter clockwise
A) Controls both motors together B) Controls both motors separately
A) What is the current firmware version B) How far the eV3 has traveled C) What sensors and motors are attached and their current readings D) When the program was last saved
A) Download and run the program B) Return the last input and output settings to the software C) Switch from program control to remote control
A) Click the + tab near the top of the screen B) Enter a name and press the Go >>> button C) Press the New Program button on the home screen |