A) Six B) Eight C) Four D) Two
A) Polyester B) Polyurethane C) Polystyrene D) Polyethylene
A) Lithium-transition-metal-oxide B) Poly(vinylidene fluoride) C) Polypropylene D) Conductive additive
A) Polyethylene B) Carbon C) Polypropylene D) Polyvinylidene fluoride
A) Number of electrodes B) Physical phase of the electrolyte C) Presence of a separator D) Use of conductive additives
A) Metal-based B) Pure liquid C) Dry solid or gel-like D) Gaseous
A) Solid and liquid B) Liquid and gaseous C) Conductive and non-conductive D) Dry solid and gel polymer
A) Presence of liquid electrolytes B) Lack of lithium salts C) High volatility D) Poor ion transfer due to physical phase
A) Polypropylene B) Gelled electrolyte C) Solid metal D) Polyethylene
A) Heating the cell to high temperatures B) Incorporating organic liquid in a polymer matrix C) Adding solid metal powder D) Removing all liquid from the cell
A) Lower cost of production B) Higher conductivity at room temperature C) Higher thermal stability and low volatility D) Increased mass of the battery
A) 4.2 V B) 5.0 V C) 3.6 V D) 2.7 V
A) 2.7 V B) 4.2 V C) 1.8 V D) 3.6 or 3.7 V
A) 1.8–2.0 V B) 2.7–3.0 V C) 4.0–4.2 V D) 3.6–3.7 V
A) 2.7–3.0 V B) 1.8–2.0 V C) 3.6–3.7 V D) 4.2 V
A) Separator B) Electronic circuit C) Conductive additive D) Polymer binder
A) To monitor and balance the state of charge B) To allow for faster manufacturing C) To increase the total voltage D) To reduce internal resistance
A) Conductive additive B) Carbon negative electrode C) Separator film D) Polymer matrix
A) Polypropylene B) Carbon C) Poly(vinylidene fluoride) D) Lithium-metal-oxide
A) LiPo B) LiSol C) LiPolymerX D) LiDry
A) Lithium hexafluorophosphate B) Ethylene carbonate C) Diethyl carbonate D) Polyacrylonitrile (PAN)
A) Increased liquid leakage B) Faster liquid convection C) Improved safety features D) Lower manufacturing cost
A) Underground power grids B) Stationary power plants C) Heavy industrial machinery D) Weight-critical devices
A) Nishi B) Scrosati C) Michel Armand D) Bellcore
A) 2005 B) 1978 C) 1998 D) 1991
A) They are pure dry electrolytes B) They are strictly liquid batteries C) They contain no liquid solvent D) They are hybrid systems
A) Hybrid lithium cell B) Solid-state polymer unit C) Gelled lithium-ion (GLi) D) Plastic lithium-ion cell (PLiON) |